|
The GARMIN GPS
35 TracPak is a complete GPS receiver and embedded antenna designed
for a broad spectrum of OEM (Original Equipment Manufacturers)
system applications. Based on the proven technology found in other
GARMIN 12–channel GPS receivers, the GPS 35 will track up to twelve
satellites at a time while providing one-second navigation updates
and low power consumption. Its far-reaching capability meets the
sensitivity requirements of land navigation as well as the dynamics
requirements of high-performance aircraft.
The GPS 35
TracPak design utilizes the latest technology and high-level circuit
integration to achieve superior performance while minimizing space
and power requirements. Utilizing GARMIN's own proprietary chipset,
all critical components of the system including the RF/IF receiver
hardware and the digital baseband are designed and manufactured by
GARMIN to ensure outstanding quality and capability.
The GPS
35 TracPak is housed in a black, water-resistant case and designed
to withstand rugged operating conditions. While the GPS 35 TracPak
is designed as a "plug 'n play" GPS solution, the minimum system
must provide a source of power and a clear view of the GPS
satellites. The system may communicate with the GPS 35 via two
RS-232 compatible bi-directional communication channels. Internal
memory backup allows the GPS 35 to retain critical data such as
satellite orbital parameters, last position, date, and
time.
|
- GPS35-LVC Attached 10 foot
power/data cable with bare wire ends. Accepts power from
unregulated low voltage power supplies between 3.6 and 6 VDC.
Asynchronous serial data interfaces via 2 serial ports with CMOS
voltage level outputs, RS-232 polarity.*
- GPS35-LVS
Attached 10 foot power/data cable with bare wire ends. Accepts
power from unregulated low voltage power supplies between 3.6 and
6 VDC. Asynchronous serial data interfaces via 2 serial ports with
true RS-232 voltage level outputs.*
- GPS35-HVS
Attached 5 meter power/data cable with bare wire ends. Accepts
power from unregulated high voltage power supplies between 6 and
40 VDC. Asynchronous serial data interfaces via 2 serial ports
with true RS-232 voltage level outputs.*
- GPS35PC
Attached 10 foot power/data cable with female DB-9 serial
connection, ready to attach to your PC. Additional 8 foot power
cable extension from the DB-9 connector terminates in a cigarette
lighter plug for easy application of power supply voltage between
6 and 40 VDC. Asynchronous serial data interface via a single
serial port with true RS-232 voltage level output.* **
*All serial
inputs on all versions are compatible with either true RS-232 or
TTL/CMOS voltage levels. Port 1 uses NMEA 0183 data format. Port 2
transmits binary position and raw measurement data and receives RTCM
SC-104 differential corrections data, message types 1, 2, 3, and 9.
**GPS35PC does
not implement Port 2. |
