DB ascii dump: C:\EIVA\NaviPac\Db\gensetup.DB
Date:         30.08.2004 11:10
User:         eiva1
UserId:       0
Restart mode: enabled
Systems:      2
Stations:     2
Instruments:  10
----------------------------------------------------------
Ellipsoid :          WGS 84
Inv. flat.:  298.2572235630
Semi major:    6378137.0000
Projection:     UTM (north)
Proj. type:              05
Org. scale:  0.999600000000
1.Parallel:  033°00'0.0000"
2.Parallel:  045°00'0.0000"
Longitude:   015°00'0.0000"
Latitude:    000°00'0.0000"
Easting:        500000.0000
Northing:            0.0000
UTMzone:                 33
----------------------------------------------------------
Datum Shift: 
Method:  None
Tx    :         0.000000 m
Ty    :         1.#INF00 m
Tz    :         0.000000 m
Rx    :     0.0000000000 °
Ry    :     0.0000000000 °
Rz    :     0.0000000000 °
PPM   :         0.000000
----------------------------------------------------------
Selected data scale:
Position: Metric scale 1.00000000 Unit m
Depth:    Metric scale 1.00000000 Unit m
Logging:  Pos 1 Depth 1
----------------------------------------------------------
Environmental data:
Gravity       : 9.82000
Pressure Surf : 1.00000
Density Water : 1.00000
Sound velocity: 1500.00000
----------------------------------------------------------
Survey information:
Area          : Svalbard
Client        : IGV
Job           : Svalex 2004
Vessel        : G.O. Sars
----------------------------------------------------------
Height/geoidal data:
Geoidal red.  : Manual
GPS H ->Offset: No 
----------------------------------------------------------
Global parameters:
Deskewing     : Yes Filter 12.00
Cycle freq.   : 1.00
CMG/SMG Filt. : 10.00 10.00 20.00 30.00 50.00 
GPS setting   : Use all
USBL Setting  : Stacked Surface = Yes
              : Use time from HiPAP = No
              : Hold time = 5.00 sec
              : Tolerance = 100.00 %
----------------------------------------------------------
Navigation Systems:
 1: Ashtech GPS1: test
 2: GPS1 (NMEA): test
----------------------------------------------------------
Navigation Stations:
 1:GPS1 (NMEA)-default gps         
   avail: OK, COe: 0.00, COn: 0.00, Use age/time: NO, Fixed age: 0.00, GeoH: 25.00, DatumS: None (0)
 2:Ashtech GPS1-st1                
   avail: OK, COe: 0.00, COn: 0.00, Use age/time: NO, Fixed age: 0.00, GeoH: 22.00, DatumS: None (0)
----------------------------------------------------------
Navigation Instruments:

----------- Surface Navigation   ------------
 0: GPS1 (NMEA)                      type:  44, seq: 0, Mode [On ] Port 20 IO  4800 N 8 1 XYZ: 1.000 10.000 13.000
   Command to GPS: FALSE, Use PPS: FALSE, Use ZDA: TRUE, command file:GPS024.gps

----------- Gyro                 ------------
 1: Seapath                          type: 158, seq: 0, Mode [On ], IO Type: UDP/IP, port: 3002, IP addr: 010.003.032.036 XYZ: 0.000 0.000 0.000
   CO: 0.000, Time Slice: 0.000, Offset: G.O. Sars, obj.no:   0

----------- Motion sensor        ------------
 2: Seapath RPH                      type: 200, seq: 0, Mode [On ], IO Type: UDP/IP, port: 3002, IP addr: 010.003.032.036 XYZ: 0.000 0.000 0.000
   Roll CO: 0.000, Pitch CO: 0.000, Heave CO: 0.000, Time Slice: 0.000, Offset:G.O. Sars, obj.no:   0

----------- Dynamic positioning  ------------
 3: HPR 410/HiPAP                    type: 496, seq: 0, Mode [Off] Port 16 IO  9600 N 8 1 XYZ: 0.000 0.000 0.000
   Aglantha                                , obj.no    3, type d, id 14, XYZ 0.000 0.000 0.000
 4: Remote dynamic objects 1         type: 421, seq: 0, Mode [Off] Port 01 IO  9600 N 8 1 XYZ: 0.000 0.000 0.000

----------- Data Output          ------------
 5: Data to Geco TriAcq              type: 664, seq: 0, Mode [On ], IO Type: Serial, Port 10, IO  9600 N 8 1
   Offset=G.O. Sars, obj.no:   0 Pos/Depth Scaling: No
 6: NMEA1                            type: 624, seq: 0, Mode [Off], IO Type: UDP/IP, port: 5001, IP addr: 010.003.255.255 XYZ: 0.000 0.000 0.000
   Offset=G.O. Sars, obj.no:   0 Pos/Depth Scaling: No
 7: Position to overlay Aglantha     type: 612, seq: 0, Mode [Off], IO Type: Serial, Port 18, IO  9600 N 8 1
   items=Lat.(DDD°MMM.MMMMMM):Long.(DDD°MMM.MMMMMM)<CR><LF>                                                                                                                                                       Pos/Depth Scaling: No
 8: User Defined output 9            type: 619, seq: 0, Mode [Off], IO Type: Serial, Port 01, IO  9600 N 8 1
   items=A<CR><LF>                                                                                                                                                                                                Pos/Depth Scaling: Yes

----------- Data Acquisition     ------------
 9: NMEA 183 Depth                   type: 703, seq: 0, Mode [On ] Port 08 IO  4800 N 8 1 XYZ: 0.000 0.000 0.000
   Offset=G.O. Sars, obj.no:   0, No. of channels=1
       Name:             EK60, channel=1, avail: OK, X: 0.000, Y:0.000, Z: 0.000
----------------------------------------------------------
This information is saved in 'C:\EIVA\NaviPac\log\current.setup.txt' in ASCII format 
----------------------------------------------------------