# KEYWORD:D,R,V1,V2,..;T,C,W,X|D,R,V1,V2,..;T,C,W,X
# D:default, R:Range(R/U), V1:value; T:type (F,I,S), C:column, W: width, X:decimals
WAVEFORM_BASE:BER;S,40,5      
Waveform base name to use
Name of waveform data base to be searched. Normally this is a 1-5 letter
data base name. The name must be written as shown above under Par1. 
Not needed for the default data base.

WAVEFORM_DIRS:/net/seismo/seismo/WOR/seisnet;S,40,80
Waveform directory to search      
The complete path to directories where the system should look for waveform files.

MERGE_WAVEFORM:NSN;S,40,3   
Code for merging waveform  
The network code given to waveform files merged with MULPLT when running from EEV.
See MULPLT and EEV. Max 3 characters.

MAP_LAT_BORDER:3.0,R,0,45;F,40,7,3
Latitude distance from center
These parameters are used with command MAP and GMTMAP in EEV, 
which plot a map centered on current epicenter. The two parameters give 
the distance in degrees from the epicenter that the map should be plotted.
If both set to ‘0.’ EEV will ask for the parameters.

MAP_LON_BORDER:6.0,R,0,90;F,40,8,3
Longitude distance from center
These parameters are used with command MAP and GMTMAP in EEV, 
which plot a map centered on current epicenter. The two parameters give 
the distance in degrees from the epicenter that the map should be plotted.
If both set to ‘0.’ EEV will ask for the parameters.

EPIMAP_STATIONS:  ;S,40,1    
Plot stations when using eev map command
One letter indicator for plotting stations, in first column. 
See EPIMAP program for codes. A  is all.

EPIMAP_MAP_FILE:EUROPE;S,40,20
Name of map file for map option in eev
The map coordinates file to use with MAP option in EEV.

EPIMAP_PROJECTION:3.,R,1,12;F,40,3,0
Epimap projection with map option in eev
The projection number used by EPIMAP, see EPIMAP program for choices.

SPECTRAL GEO_DEPTHS:10.0,R,0,20;F,40,10,1|14.0,R,0,20;F,51,10,1
SPECTRAL GEO_DEPTHS
Geometrical spreading parameter
Depth range where geometrical spreading changes from surface wave to body 
wave spreading, S-waves only. Default 50 and 100 km. This is only used if 
distance is larger than HERKIJ_DISTANCE.   

HERKIJ_DISTANCE:100.0,R,0,10000;F,40,10,1
HERKIJ_DISTANCE
Epicentral distance at which geometrical spreading changes from body 
wave spreading to surface wave spreading, S-waves only. Default 100 km.

REG_KEEP_AUTO:1.,U,0,1;F,40,2,0
Set flag for keeping phases when putting in a new event
If flag set to 1.0, keep automatic pics when registering event from EEV.

COPY_WAV_DIR:BER;S,40,5       
Diectory to waveform files when registering a new event
Normally, waveform files are copied to WAV when registering an event. 
f this parameter is set, waveform files can be copied to the WAV data base
specified. Max 5 characters.

TEXT_PRINT:nenscript -Psps;S,40,80
Printer command used to print an S-file from EEV.
Printer command used to print an S-file from EEV

OUTPUT_DIR:./;S,40,80
Output Directory for SEISAN commands
Output Directory for SEISAN commands

INIT_IMGMAP_FILE:/seismo/DAT/IMGWORLD.gif;S,40,80
File name of the initial map
File name of the initial map represented as image

MAP_SERVER:0,U,0,1,2,3,4,5;I,40,1
Web map server
Type of map retrieved from internet or locally; 0:Static local image(country boundaries),
1: Static remote image, 2,3,4,5: Dynamic Remote image(2:country boundaries,
3:Relief from GTOPO30 only land,4:Two minute shaded relief,5: Combine 3 and 4

IMGMAP_PATH:/seismo/DAT/IMGMAP;S,40,80
PATH for the static local map
PATH for the static local maps (images) stored in the local hard disk

INIT_MAP_LOWER_LATITUDE:-90.0,R,-90,90;F,40,7,3
Lower latitude of the initial map
Lower latitude of the initial map

INIT_MAP_UPPER_LATITUDE:90.0,R,-90,90;F,40,7,3
Upper latitude of the initial map
Upper latitude of the initial map

INIT_MAP_LEFT_LONGITUDE:-180.0,R,-180,180;F,40,8,3
Lower longitude of the initial map
Lower longitude of the initial map

INIT_MAP_RIGHT_LONGITUDE:180.0,R,-180,180;F,40,8,3
Upper longitude of the initial map
Upper longitude of the initial map

ACROBAT_READER:/prog/acroread;S,40,80
Command name for the Adobe Acrobat Reader
Absolute Path for the Adobe Acrobat Reader (needed for the help files)

HIGH_ACCURACY:1.,U,0,1;F,40,2,0
High accuracy
Setting it to 1.0 enables high accuracy operation.
This parameter affects programs MULPLT, HYP and UPDATE

WEBMAPSERVER2:http://pcseis6.ifjf.uib.no:7001/getImageMap?ACTION=2&;S,40,80
Second Web MAP Server URL
Second Web MAP Server URL

WEBMAPSERVER3:http://demo.cubewerx.com/demo/cubeserv/cubeserv.cgi?;S,40,80
Third Web MAP Server URL
Third Web MAP Server URL