BLASTER SYSTEM
Two radio controlled dynamite firing systems will be supplied; one acting as spare.
⚠ (:toc:)
<:vspace>
<:vspace>
<:vspace>
!MAIN BLASTER SYSTEM
----
<:vspace>
The primary blaster system comprises two units, one on the recording site, the other on the shooting site:
<:vspace>
(:table border=1 cellpadding=3 cellspacing=0:)
(:cellnr bgcolor=#eeeeee align=center:) '''Parameter'''
(:cell bgcolor=#eeeeee align=center:) '''Recording site'''
(:cell bgcolor=#eeeeee align=center:) '''Shooting site'''
(:cellnr align=center:) Mfr.:
(:cell:) Input/Output, Inc.
(:cell:) Input/Output, Inc.
(:cellnr align=center:) Mod.:
(:cell:) Synchraphone I
(:cell:) Synchraphone II
(:cellnr align=center:) Power:
(:cell:) 12 - 15 Vdc<br />External
(:cell:) 12 - 15 Vdv<br />Internal battery, 2 x 6 V, each 10 Ah<br />Mfr.: Sonnenschein, mod: A506 10.0S, 6V, 10Ah<br />Size W x D x H: 150 x 50 x 94 mm (height excluding power tabs)
Charging details, see below
(:cellnr align=center:) Current consumption @13 V dc:
(:cell:) Idle: 0.92 A
Transmitting, low power: 6 A approx.<br />Transmitting, high power 6 A approx.
(:cell:) Idle: 0.30A<br />HV charging: 1.1 A average
Transmitting, low power: 2.6 A<br />Transmitting, high power: 5.4 A
(:cellnr align=center:) Supports voice communication:
(:cell:) Yes
(:cell:) Yes
(:cellnr align=center:) Radios:
(:cell:) Yaesu, mod FT-212RH<br />%newwin% [[http://www.radioamateur.eu/schemi/FT212RH_user.pdf | Link to manual]]
(:cell:) Yaesu, mod FT-212RH<br />%newwin% [[http://www.radioamateur.eu/schemi/FT212RH_user.pdf | Link to manual]]
(:cellnr align=center:) Pictures, front view:
(:cell:) [[Attach:synchraphone-1-front.png | Attach:synchraphone-1-front-small.png]] <br />''Synchraphone I. Click to enlarge''
(:cell:) [[Attach:synchraphone-2-front.png | Attach:synchraphone-2-front-small.png]]<br />''Synchraphone II. Click to enlarge''
(:cellnr align=center:) Pictures, rear view:
(:cell:) [[Attach:synchraphone-1-rear.png | Attach:synchraphone-1-rear-small.png]] <br />''Synchraphone I rear view. Click to enlarge''
(:cell:) [[Attach:synchraphone-2-rear.png | Attach:synchraphone-2-rear-small.png]]<br />''Synchraphone II rear view. Click to enlarge''
(:cellnr align=center:) Pictures, external wiring interface:
(:cell:) [[Attach:synchraphone-1-wiring.png | Attach:synchraphone-1-wiring-small.png]]<br />''Synchraphone I external interface wiring. Click to enlarge''
(:cell:) [[Attach:synchraphone-2-wiring.png | Attach:synchraphone-2-wiring-small.png]]<br />''Synchraphone II external interface wiring. Click to enlarge''
(:tableend:)
<:vspace>
<:vspace>
!!Recording site: Synchraphone I
----
<:vspace>
<:vspace>
!BACKUP BLASTER SYSTEM
----
<:vspace>
Like above, the backup blaster system comprises two units, one on the recording site, the other on the shooting site:
<:vspace>
(:table border=1 cellpadding=3 cellspacing=0:)
(:cellnr bgcolor=#eeeeee align=center:) '''Parameter'''
(:cell bgcolor=#eeeeee align=center:) '''Recording site'''
(:cell bgcolor=#eeeeee align=center:) '''Shooting site'''
(:cellnr align=center:) Mfr.:
(:cell:) Input/Output, Inc.
(:cell:) Input/Output, Inc.
(:cellnr align=center:) Mod.:
(:cell:) Series 200 Seismic Source Synchronizer - Encoder
(:cell:) Series 200 Seismic Source Synchronizer - Decoder
(:cellnr align=center:) Power:
(:cell:) 12 - 15 Vdc<br />External
(:cell:) 12 - 15 Vdv<br />External
(:cellnr align=center:) Current consumption @13 V dc:
(:cell:) Idle: 0.92 A
Transmitting, low power: x A approx.<br />Transmitting, high power x A approx.
(:cell:) Idle: x A<br />HV charging: x A average
Transmitting, low power: x A<br />Transmitting, high power: x A
(:cellnr align=center:) Supports voice communication:
(:cell:) Yes
(:cell:) Yes
(:cellnr align=center:) Radios:
(:cell:) Yaesu, mod FT-2400H<br />%newwin% [[http://www.radioamateur.eu/schemi/FT2400H_user.pdf | Link to manual]]
(:cell:) Yaesu, mod FT-2400H<br />%newwin% [[http://www.radioamateur.eu/schemi/FT2400H_user.pdf | Link to manual]]
(:cellnr align=center:) Pictures, top view:
(:cell:) [[Attach:enc200.png | Attach:enc200-small.png]] <br />''Mod 200 Encoder. Click to enlarge''
(:cell:) [[Attach:dec200.png | Attach:dec200-small.png]]<br />''Synchraphone II. Click to enlarge''
(:cellnr align=center:) Connector pin-out
(:cell align=left:)
<:vspace>
%red%'''SYSTEM'''%%
<:vspace>
Attach:14-12P.png<br />''SYSTEM connector<br />14-12P pin-out (note -> pin view; mirror for socket view)''
<:vspace>
* PIN A: Clock TimeBreak (TB) to galvo and recording system
* PIN B: Clock TB to galvo and recording system
* PIN C: Clock TB (TTL logic)
* PIN D: Uphole out
* PIN E: Uphole out
* PIN F: Confirmation TB
* PIN G: Confirmation TB
* PIN H: Logic GND
* PIN J: Chassis
* PIN K: Arm
* PIN L: Fire
* PIN M: [check ...]
<:vspace>
<:vspace>
%red%'''RADIO'''%%
<:vspace>
Attach:12-10P.png<br />''RADIO connector<br />12-10P pin-out (note -> pin view; mirror for socket view)''
<:vspace>
* PIN A: Radio transmitter input (HI)
* PIN B: Radio transmitter input (LO)<br />(A & B normally parallells microphone output)
* PIN C: Radio receiver output (LO)
* PIN D: Radio receiver output (HI)<br />(C & D normally parallells speaker)
* PIN E: Send / receive switch
* PIN F: Send / receive switch
* PIN G: Send / receive switch<br />Relay contacts in encoder opens F and G and closes F and E during "ARM" and "SYNC CODE" transmissions.
* PIN H: Chassis
* PIN J: NC (Not connected)
* PIN K: NC
<:vspace>
SHIELD: Separate shield lines A+B, C+D, E+F+G, to Radio Ground. Shield should be terminated at Microphone ground ONLY.
<:vspace>
<:vspace>
%red%'''LINE'''%%
<:vspace>
Attach:8-3P.png<br />''LINE connector<br />8-3P pin-out (note -> pin view; mirror for socket view)''
<:vspace>
* PIN A: To line
* PIN B: Chassis
* PIN C: To line<br />B used for cable shield. When using shielded cable terminate shield at B only. Do not ground shield.
<:vspace>
<:vspace>
%red%'''POWER'''%%<br /><:vspace>
Attach:8-2P.png<br />''POWER connector<br />8-2P pin-out (note -> pin view; mirror for socket view)''
<:vspace>
* PIN A: 12 Vdc supply NEG
* PIN B: 12 Vdc supply POS<br />2 Amp.
<:vspace>
<:vspace>
(:cell align=left:)
<:vspace>
%red%'''LINE / RADIO'''%%<br />Attach:12-10P.png<br />''LINE / RADIO connector<br />12-10P pin-out (note -> pin view; mirror for socket view)''
<:vspace>
* PIN A: Radio receiver output (LO)
* PIN B: Radio receiver output (HI)<br /> (normally parallells speaker)
* PIN C: Chassis
* PIN D: Radio transmitter input (HI)
* PIN E: Radio transmitter input (LO)<br />Use D & E for line operation instead of radio
* PIN F: Send / receive switch
* PIN G: Send / receive switch
* PIN H: Send / receive switch<br />Realy contact in Decoder opens F and H and closes F and G at Sync zero.
* PIN J: Battery charger POS
* PIN K: Battery charger NEG
<:vspace>
<:vspace>
%red%'''UH PHONE'''%%<br />Attach:8-3P.png<br />''UH PHONE connector<br />8-3P pin-out (note -> pin view; mirror for socket view)''
* PIN A: UH Phne
* PIN B: Chassis
* PIN C: UH Phone
<:vspace>
(:tableend:)
<:vspace>
<:vspace>
